Silent Knight Fire Alarm Components
Addressable Fire Alarm Control Panels
Whether you’re doing a large commercial installation or a smaller job, the IntelliKnight Series has the right addressable panel for your needs. IntelliKnight 5820XL, 5808, and 5700 makes set-up simple by automatically initializing detectors. Plus, it continuously monitors their operation, provides drift compensation, controls detector sensitivity, and performs an NFPA 72-compliant sensitivity check. Silent Knight gives you the capability to design an affordable, addressable system for any facility. Managing your facilities has never been easier!
5808
The IntelliKnight 5808 is a 127-198 point single loop addressable fire alarm control/communicator system. Powerful features such as drift compensation, maintenance alert, built-in digital communicator, and distributed intelligent power are delivered in this powerful FACP from Silent Knight.
Features and Benefits
-
Built-in support for up to 99 SK detectors and 99 SK modules creating a total point capacity of 198 points (version 10.0 and higher)
-
Built-in support for up to any combination of 127 SD devices
-
Built-in digital communicator/dialer
-
Uses standard wire – no shielded or twisted pair required
-
Notification circuits configurable as two Class A (Style Z) or four Class B (Style Y), or auxiliary for resettable, constant, or door holder power
-
Point status meets calibrated smoke test requirements for NFPA 72
-
One Form C trouble relay and two Form C programmable relays
-
Built-in synchronization for multiple notification appliance manufactures
-
RS-485 SBUS provides communication to intelligent distributed system accessories
Emergency Communication Systems
Silent Knight’s SKE-450 helps you meet compliance needs for areas of assembly where voice evacuation is required. The signature of the SKE-450 is its best-in-class 50-watt amplifier.
5820XL-EVS
The 5820XL-EVS is an addressable fire alarm control panel with an integrated emergency communication system. One control provides addressable fire alarm protection, voice evacuation, and mass notification. The 5820XL-EVS is UL 864 listed as a fire alarm control panel and UL 2572 listed as an emergency communication system. Expandable to 500 Watts of power using distributed amplifiers. The EVS-RCU Remote Command Unit meets NFPA 72 requirements for LOC (Local Operator Console). The 5820XL-EVS is the smartest way of integrating a fire alarm control panel with voice evacuation or emergency communication system.
Features and Benefits
-
Emergency voice system and fire alarm control are combined in one cabinet saving up to 3 hours of installation time
-
Distributed amplifiers allow you to put the power where you need it
-
System capacity of up to 500W
-
Meets standards for Emergency Communication and Mass Notification Systems (UL2572, NFPA72 2010, UFC 4-021-01)
-
Built-in support for up to 99 SK detectors and 99 SK modules, expandable to 396 SK detectors and 396 SK modules creating a total point capacity of 792 points using the SK protocol
-
Built-in support for up to any combination of 127 SD devices, expandable to 508 devices using the SD protocol
-
Each amplifier has four built-in speaker circuits expandable to eight
-
Can select EVS message as priority over fire
-
Built-in digital communicator/dialer
-
Support of up to four EVS-RCUs. The EVS-RCU meets the requirements for a Local Operator Console.
-
Six Flexput™ circuits configurable as three Class A (Style Z) or six Class B (Style Y), auxiliary for resettable, constant, or door holder power. Can also be configured as initiation circuit to monitor conventional devices
-
Point status meets calibrated smoke test requirements for NFPA 72
-
One Form C trouble relay and two Form C programmable relays
-
15 Recordable one minute messages that can be mapped to eight EVS buttons
Conventional Fire Alarm Control Panels
Whether your installation calls for 2 zones or 30 zones, we’ve got you covered. Our entire SK-Conventional Series SK-5208, SK-4, and SK-2 boasts power and features you won’t find in panels that cost twice as much.
Conventional Devices
Silent Knight has a wide variety of conventional pull stations and accessories.
Die Cast Metal Manual Pull Stations
Silent Knight's new line of manual pull stations feature high-quality, die cast metal construction. They are available in either single or dual action configurations with SPST switch, and with wire lead or terminal strip connections. The normally open contact, which closes when the pull station is activated, is rated for 1 amp, at 125VAC, or 3OVDC. The contacts are gold-plated to avoid risk of corrosion. All models in the series have been tested by UL for compliance to the latest requirements of the Americans with Disabilities Act (ADA).
Features and Benefits
-
Weatherproof model approved for outdoor use
-
Terminal connections
-
Reset using the same keys as Silent Knight enclosures
-
Surface mount back boxes available
-
High-gloss red enamel finish on die cast metal
-
Corrosion-resistant gold-plated contact
5230 LCD Remote Annunciator
The Model 5230 Remote Alphanumeric Annunciator can be used to program models 5104, 5204, 5207 and C6000 controls. Programming options include telephone numbers, reporting format, account number, loop response times (electronic retard), test time, output activation, and user and installer codes. System programming is stored in a non-volatile EEPROM chip which is re-programmable hundreds of times. Each control features a quick-connect plug that allows temporary connection of the annunciator for programming.
Features and Benefits
-
2 x 16 character LCD display
-
Each 5230 individually supervised by the fire control panel
-
Compatible with 5104 digital alarm communicator
-
Notification Appliances
Complete line of audible/visible notification appliances from System Sensor & Wheelock. The notification appliances include indoor to outdoor models of horns, strobes, and speakers.
